2002 jeep grand cherokee fuel tank9/23/2023 In the case of P0456, it is a small leak, less than. If the EVAP system does not maintain the pressure, the ECM recognizes an EVAPorative emission control leak. During the leak test, the ECM closes the vent control valve and purge valve to seal the EVAPorative system. However, when the Jeep Grand Cherokee is turned off the ECM performs a leak test to ensure the EVAPorative emission control system is working properly. The vent control valve is usually open when the engine is at normal operating temperature, and the purge volume control valve is commanded on when the ECM is ready to burn the built-up fuel vapors. The flow of the gas vapors from the charcoal canister to the engine air intake is controlled by a purge volume control valve. The vent control valve is controlled by the engine control module (ECM) and allows air to flow into the charcoal canister to purge the gas vapors into the engine air intake to be burned. The fuel vapors from the fuel tank are absorbed and stored by charcoal pellets in the charcoal canister. The EVAPorative emission control (EVAP) system prevents fuel vapors from escaping into the atmosphere. However, as with all check engine lights, it is recommended that you get it fixed as soon as possible so the engine can be running at the proper specifications to prevent further damage.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |